fbpx
Friday, March 29, 2024
HomeTech#263Tech: How to Turn Your Windows PC Into a Wi-Fi Hotspot

#263Tech: How to Turn Your Windows PC Into a Wi-Fi Hotspot

Windows can turn your PC into a wireless hotspot, allowing it to share its wired or wireless Internet connection with other wireless devices. This enables you to save unnecessary costs on buying airtime bundles which are very slow when tethering. But how you set it up that depends on what version of Windows you’re running. Here’s how it all works:

If you’re running Windows 10 with the Anniversary Update installed, then you’re in luck. With that update, Windows now has a single switch for turning any PC with Wi-Fi into a hotspot, and it doesn’t matter whether the Internet connection you want to share is wired or wireless.

First, fire up Settings by pressing Windows+I on your keyboard. On the main Settings page, click “Network & Internet.”

wmh_a

On the Network & Internet page, on the left-hand side, click “Mobile hotspot.”

wmh_b

On the right-hand side, turn on the “Share my Internet connection with other devices” switch. If you want something other than the default network name and password, click the “Edit” button.

wmh_c

In the Edit window, type whatever network name and password you want to use and then click “OK.”

wmh_d

And that’s all you really have to do in Windows 10. It’s one of the best new features of the Windows 10 Anniversary Update, even though it rolled out with relatively little fanfare.

Share a Wired Internet Connection in Windows 7

The ability to share your PC’s wired Internet connection to wireless devices is integrated into Windows 7’s networking interface through something called an ad-hoc network. An ad-hoc network is really just a simple, direct network connection between devices. In this case, you’ll be creating an ad-hoc network between your PC’s wireless connection and any wireless devices you want to connect. You just need to make sure that your wired connection is set up and that the PC does have Wi-Fi available.

Note that when you set up an ad-hoc network using your PC’s Wi-Fi, it will disable any existing connection that uses that Wi-Fi adapter. That’s why this method only works if your internet is coming from an Ethernet source.

ALSO ON 263Chat:  Drone Tech Hub Launches In Zimbabwe

If you’ve never set up a network like this, be sure to read our full guide to sharing an Internet connection through an ad-hoc network. In short, though, you’ll open the Manage Wireless Networks window (you can find it by opening start and searching for “wireless”), click the Add button, and then click “Create an ad hoc network”. Enter a name and passphrase for the network and it’ll appear in the list of wireless networks. Select it and your laptop will disconnect from its current Wi-Fi network and start hosting an ad-hoc network your other devices can connect to.

wmh_1

Be sure to enable the “Allow other network users to connect through this computer’s Internet connection” checkbox so that your PC will share its wired Internet connection with the devices connected to your PC over the ad-hoc network.

wmh_2

Share a Wired Internet Connection in Windows 8

Unfortunately, Windows 8 stripped away the graphical interface for setting up an ad-hoc network, so it’s not quite as easy to set up as it is in Windows 7 or 10. The underlying feature is still present, though. You just have to resort to a little command line trickery.

Emirates

First, you’ll need to make sure your existing wireless network is shared with other network users. Press Windows+R on your keyboard to open the Run dialog box, type “ncpa.cpl”, and then hit Enter.

wmh_3

In the network connections window, right-click your Wireless network and select “Properties” from the context menu.

wmh_4

Switch over to the “Sharing” tab and enable the “Allow other network users to connect through this computer’s Internet connection” checkbox. Go ahead and clear the “Allow other network users to control or disable the shared Internet connection” checkbox while you’re at it and then click the “OK” button.

wmh_5

Next, you’ll need to launch the Command Prompt with administrative privileges. Right-click in the bottom left of your screen (or hit Windows+X) and then select “Command Prompt (Admin)” on the Power Users menu that appears.

ALSO ON 263Chat:  Vaya Logistics Set To Give Cassava On-Demand Services A Lift

wmh_6

With the command prompt open, your next step is to set up the wireless network using the netsh like so:

netsh wlan set hostednetwork mode=allow ssid="<SSID>" key="<PASSWORD>"

Where <SSID> is the name of your network and <PASSWORD> is the password you want users to connect with. The access point is created with WPA2-PSK (AES) encryption.

wmh_7

Next, you’ll start broadcasting our network with the following command:

netsh wlan start hostednetwork

wmh_8

And at any time, you can use this last command to show information about the connection. It lists things like the channel your connection uses, ssid name, authentication type, radio type, and the number of clients connected to your network.

netsh wlan show hostednetwork

wmh_9

When you’re done, you should be able to connect any Wi-Fi device to your new ad-hoc network.

Share a Wireless Internet Connection in Windows 8 or 7

If you want to share a wireless Internet connection in Windows 8 or 7 with other wireless devices, you’ll need use a third party app. We recommend Virtual Router because it’s free, open-source, and easy to set up. You can also use it to share a wired connection if you just want an easier way to do it than creating an ad-hoc network.

Start by downloading Virtual Router and starting it up. Using it really couldn’t be easier. Provide a name for your network, enter a passphrase, and choose the connection you want to share with devices that connect to that Wi-Fi network. Click the “Start Virtual Router” button, and you’re done. You can even see a list of connected devices in this window.

wmh_10

Setting up a mobile hotspot on your Windows PC can be a bit of a hassle, or it can be pretty easy. It just depends on what version of Windows you’re running and whether you’re willing to use a third-party app. But the next time you’re stuck somewhere with only a wired Internet connection, at least you know you can use your PC to share that connection with your other wireless devices.

Share this article
Written by

Shingie Lev Muringi is a Technology Analyst & Digital Media Strategist by profession. He is a qualified Cisco Certified Network Engineer & a BTech. E-Commerce alumni with the Harare Institute of Technology. Shingie is a very passionate technology enthusiast who is driven by a burning desire to be a leading strategist in this digital revolution era where every organization needs to impress the paradigm shift with urgency. He has previously worked for TN Holdings, Steward Bank, Econet Wireless - Ecocash and TechnoMag before joining 263Chat as a Journalist

No comments

Sorry, the comment form is closed at this time.

You cannot copy content of this page